Solar PV & PV+Storage Costs Keep Dropping, New NREL Reports Show

Sign up for daily news updates from CleanTechnica on email. Or follow us on Google News!

The National Renewable Energy Laboratory (NREL) has released its annual cost breakdown of installed solar photovoltaic (PV) and battery storage systems. U.S. Solar Photovoltaic System and Energy Storage Cost Benchmark: Q1 2021 details installed costs for PV systems as of the first quarter of 2021.

Costs continue to fall for residential, commercial rooftop, and utility-scale PV systems — by 3%, 11%, and 12%, respectively, compared to last year. In a change from previous years’ reports, balance of systems costs have increased or remained flat across sectors this year. However, this increase in balance of systems cost was offset by a 19% reduction in module cost, causing overall costs to continue their decade-long decline.

Installed PV system costs continued to decline in the first quarter of 2021, driven by reductions in module costs. In the figure above, BOS stands for balance of systems and PII stands for permitting, inspection, and interconnection. Download the chart data.

The report’s authors used a bottom-up cost modeling approach that accounts for all system and project development costs incurred during installation to model the costs for residential, commercial, and utility-scale PV systems, with and without energy storage. They also modeled typical installation techniques and business operations from an installed-cost perspective. This strategy ensures that hardware costs reflect the actual purchase price of components as well as the sales price paid to the installer, including profits. The benchmarks assume a business environment unaffected by the novel coronavirus pandemic and represent national averages.

“As the costs of construction-related raw materials have increased during the pandemic, the total balance of systems material cost has either stayed relatively the same, or, in some cases, increased by a marginal percentage compared to the balance of systems cost reported in the Q1 2020 benchmark report. The major cost drivers that helped reduce the system installation costs of PV and energy storage systems in Q1 2021 were lower module cost, increased module efficiency, and lower battery pack cost,” said NREL’s solar and storage techno-economic analyst, Vignesh Ramasamy.

Energy Storage Costs Also Continue To Decline

Starting with the 2020 PV benchmark report, NREL began including PV-plus-storage and standalone energy storage costs in its annual reports. The 2021 benchmark report finds continued cost declines across residential, commercial, and industrial PV-plus-storage systems, with the greatest cost declines for utility-scale systems (up to a 12.3% reduction). Standalone storage systems also saw cost declines.

The 2021 PV cost benchmarks report found cost declines for PV-plus-storage and standalone battery energy storage systems (BESS). This graph shows how costs of standalone BESS fell significantly in the first quarter of 2021 compared to the first quarter of 2020.

Separate Report Digs Into Cost Declines for PV Modules

A major component of total installed system costs is the cost of the PV modules. In a second report, Photovoltaic Module Technologies: 2020 Benchmark Costs and Technology Evolution Framework Results, NREL researchers calculate a minimum sustainable price (MSP) — the price necessary to support a sustainable business over the long term — for modules. Specifically, the report calculates that price by using bottom-up manufacturing cost analysis and applying a gross margin of 15%.

This report benchmarks three established, mass-produced PV technologies as well as two promising technologies that are currently under development or in pilot production. Crystalline silicon (c-Si) dominates the current PV market, and its MSPs are the lowest — $0.25–$0.27/watt across the c-Si technologies analyzed. Cadmium telluride (CdTe) modules have a slightly higher MSP ($0.28/watt), and the copper indium gallium (di)selenide (CIGS) MSP takes a still bigger step up ($0.48/watt), largely as a result of higher labor, equipment, and facility costs. The report provides technology road maps for additional MSP reductions. The prices of c-Si and CdTe modules remain similar to each other over the short and long term, whereas the CIGS premium shrinks, but the cost differential remains significant.

The two developing technologies the report considers are III-V and perovskite PV technologies. At $77/watt, the III-V MSP benchmark is much higher than the benchmarks for established technologies, which has kept III-V PV technology in niche markets, such as space and terrestrial concentrator applications. This challenge is reflected in the III-V road map, in which several potential cost reductions still result in a long-term projection of $20/watt — two orders of magnitude higher than the long-term MSPs of the other technologies. However, III-V modules could still be worth pursuing because they are the highest-efficiency PV products on the market. The current highest research-cell efficiency is 47.1% for a multijunction III-V device, and even higher efficiencies are possible.

This report represents NREL’s first techno-economic assessment of perovskite PV modules. The estimated MSP for a single-junction sheet-to-sheet perovskite module at a small production scale is $0.38/watt, with potential cost reductions projected to reduce the MSP over the long term to $0.18/watt, assuming performance can be improved without driving up costs. Perovskites can also be combined with other PV technologies in multijunction configurations. This report estimates an MSP of $0.31/watt for perovskite-on-Si tandem modules in early production based on pilot production results.

Cost reductions from economies of scale as production grows and the accumulation of manufacturing experience are also important, but they are not included in NREL’s cost-reduction road maps. Other important module price drivers not captured in in this analysis include global supply and demand fluctuations, domestic policies related to PV deployment and manufacturing, trade policies, and corporate strategies. Comparing the bottom-up module MSP results with module market prices, however, helps clarify the effects of these other drivers.

Learn More in Two Upcoming Webinars

You can download the system cost report and the module cost report.

The report authors will also summarize key findings from the reports in two upcoming webinars:

Nov. 30 — Webinar on Installed PV System Costs Report

Dec. 1 — Webinar on PV Module Costs Report

Learn more about NREL’s solar system cost analysis.

Article courtesy of National Renewable Energy Laboratory.


Have a tip for CleanTechnica? Want to advertise? Want to suggest a guest for our CleanTech Talk podcast? Contact us here.

Latest CleanTechnica TV Video


Advertisement
 
CleanTechnica uses affiliate links. See our policy here.

US Department of Energy

The mission of the U.S. Energy Department is to ensure America’s security and prosperity by addressing its energy, environmental and nuclear challenges through transformative science and technology solutions. Learn more.

US Department of Energy has 904 posts and counting. See all posts by US Department of Energy