Connect with us

Hi, what are you looking for?

CleanTechnica
Determining exactly how much local renewable generation can reach Xcel Energy customers in Minnesota hinges in part on how many of these projects the existing grid can accommodate. To that end, the state’s Public Utilities Commission compelled the utility last year to report on more than 1,000 “feeders” delivering electricity to homes and businesses across its Twin Cities service territory.

Clean Power

Xcel Has Room For Renewable Generation On Its Minnesota Grid. So Where Is It?

Determining exactly how much local renewable generation can reach Xcel Energy customers in Minnesota hinges in part on how many of these projects the existing grid can accommodate. To that end, the state’s Public Utilities Commission compelled the utility last year to report on more than 1,000 “feeders” delivering electricity to homes and businesses across its Twin Cities service territory.

Originally published at ilsr.org.

Determining exactly how much local renewable generation can reach Xcel Energy customers in Minnesota hinges in part on how many of these projects the existing grid can accommodate. To that end, the state’s Public Utilities Commission compelled the utility last year to report on more than 1,000 “feeders” delivering electricity to homes and businesses across its Twin Cities service territory.

The study shows which areas of the grid can integrate more distributed energy resources, potentially helping streamline interconnection studies, and informing long-term infrastructure planning.

An initial review by ILSR indicated substantial available capacity for distributed generation — 1,851 megawatts (MW) throughout the Xcel network — even after accounting for projects that already installed or proposed. That’s nearly nine times more solar than is currently connected to the grid in all of Minnesota. But while that figure is encouraging, it’s also incomplete. The utility and the Minnesota Public Utilities Commission could do more to flesh out the analysis.

This week, in response to the Commission’s request for feedback, ILSR submitted comments that highlight lingering questions about the report and suggest ways to improve its comprehensiveness going forward. The text of our submission is included below, lightly edited for clarity.


Purpose of Analyzing Hosting Capacity

In general, our comments on potential improvements and our questions reflect the purpose of the hosting capacity analysis expressed the Company’s filing:

“ICF’s Integrated Distribution Planning report prepared for the Minnesota Public Utilities Commission noted that a hosting capacity analysis should be robust enough to satisfy three purposes: 1) indication of distribution feeder capacity for DER, 2) streamlining interconnection studies, and 3) annual long-term distribution planning.”

Proposed Improvements

ILSR believes the following improvements would help meet the three-part goal of the hosting capacity analysis outlined in the ICF study:

  • Including impacts from existing distributed energy resources, as the Company suggested would be possible with the 2017 DRIVE Tool update
  • Displaying these results on a heat map or similar visual tool in order to illustrate capacity in a way that aligns with the development process of securing land leases and physical project locations
  • Developing a draft model or process that considers the potential impact of queued projects (e.g. those with signed interconnection agreements)
  • Including sensitivity analysis that factors in the use of smart inverters to mitigate impacts of existing or queued projects

Other Questions and Comments

ILSR has the following questions about the hosting capacity analysis:

  • How does the DRIVE Tool compare to the iterative and streamlined methods being used for hosting capacity analysis in California in terms of accuracy, time/cost, and ability to deliver improvements suggested in the prior section?
  • In the Limitations section on page 10 of its report, the Company says “…[feeders] with existing DER have additional information that could not be utilized in the actual DRIVE Tool analysis for determining hosting capacity.” What is the nature of this omitted information, and what further insights would it provide were it to be included?
  • Is the “Installed DG” term used in the table in Attachment A the same as the “Existing/Known DG” referenced in the Limitations section on page 10?

Our final question relates to the ultimate use of the hosting capacity analysis. The ICF report refers to two uses — to indicate capacity and to streamline interconnection studies — but additional clarity about the ultimate goals and outcomes for the report would be helpful. In a review of the hosting capacity analysis for New York’s Reforming the Energy Vision process, for example, intervenors have suggested the document can be used to “automate” the interconnection of distributed energy resources to the grid. ILSR agrees that this is a useful and desirable outcome, but hopes the Commission can provide more detailed guidance about its expectations in order to guide future iterations of the hosting capacity analysis.


Photo Credit: Tony Webster via Wikimedia Commons (CC 2.0).

This article originally posted at ilsr.org. For timely updates, follow John Farrell or Karlee Weinmann on Twitter or get the Energy Democracy weekly update.

 
Check out our brand new E-Bike Guide. If you're curious about electric bikes, this is the best place to start your e-mobility journey!
 
 
Appreciate CleanTechnica’s originality and cleantech news coverage? Consider becoming a CleanTechnica Member, Supporter, Technician, or Ambassador — or a patron on Patreon.
 
Have a tip for CleanTechnica, want to advertise, or want to suggest a guest for our CleanTech Talk podcast? Contact us here.

Advertisement
 
Written By

John directs the Democratic Energy program at ILSR and he focuses on energy policy developments that best expand the benefits of local ownership and dispersed generation of renewable energy. His seminal paper, Democratizing the Electricity System, describes how to blast the roadblocks to distributed renewable energy generation, and how such small-scale renewable energy projects are the key to the biggest strides in renewable energy development.   Farrell also authored the landmark report Energy Self-Reliant States, which serves as the definitive energy atlas for the United States, detailing the state-by-state renewable electricity generation potential. Farrell regularly provides discussion and analysis of distributed renewable energy policy on his blog, Energy Self-Reliant States (energyselfreliantstates.org), and articles are regularly syndicated on Grist and Renewable Energy World.   John Farrell can also be found on Twitter @johnffarrell, or at jfarrell@ilsr.org.

Comments

You May Also Like

Clean Power

Research could improve efficiency for storing renewable energy, making carbon-free fuels, and manufacturing sustainable materials Research News, College of Science & Engineering, University of...

Clean Power

Solar panels are sprouting up in farms and rural communities all over the countryside, winning hearts and minds, if not votes.

Clean Power

In the state of Washington, advocates hope that the third time’s the charm for passing community solar legislation. For this episode of the Local Energy...

Climate Change

Deep waters in temperate climate lakes have already lost almost 20 percent of their oxygen supply. Originally published on Nexus Media. By Kaitlin Sullivan On a...

Copyright © 2021 CleanTechnica. The content produced by this site is for entertainment purposes only. Opinions and comments published on this site may not be sanctioned by and do not necessarily represent the views of CleanTechnica, its owners, sponsors, affiliates, or subsidiaries.