Published on March 21st, 2012 | by Zachary Shahan0
Gold Could Help Advance Fuel-Cell Technology
March 21st, 2012 by Zachary Shahan
Here’s another article on a recent university study I recently ran across that could help the progress of cleantech — in this case, fuel-cell technology. The article is reposted from Brown University’s newsroom.
Chemists at Brown University have created a triple-headed metallic nanoparticle that reportedly performs better and lasts longer than any other nanoparticle catalyst studied in fuel-cell reactions. The key is the addition of gold: It yields a more uniform crystal structure while removing carbon monoxide from the reaction. Results published in the Journal of the American Chemical Society.
PROVIDENCE, R.I. [Brown University] — Advances in fuel-cell technology have been stymied by the inadequacy of metals studied as catalysts. The drawback to platinum, other than cost, is that it absorbs carbon monoxide in reactions involving fuel cells powered by organic materials like formic acid. A more recently tested metal, palladium, breaks down over time.
Now chemists at Brown University have created a triple-headed metallic nanoparticle that they say outperforms and outlasts all others at the anode end in formic-acid fuel-cell reactions. In a paper published in the Journal of the American Chemical Society, the researchers report a 4-nanometer iron-platinum-gold nanoparticle (FePtAu), with a tetragonal crystal structure, generates higher current per unit of mass than any other nanoparticle catalyst tested. Moreover, the trimetallic nanoparticle at Brown performs nearly as well after 13 hours as it did at the start. By contrast, another nanoparticle assembly tested under identical conditions lost nearly 90 percent of its performance in just one-quarter of the time.
“We’ve developed a formic acid fuel-cell catalyst that is the best to have been created and tested so far,” said Shouheng Sun, chemistry professor at Brown and corresponding author on the paper. “It has good durability as well as good activity.”
Gold plays key roles in the reaction. First, it acts as a community organizer of sorts, leading the iron and platinum atoms into neat, uniform layers within the nanoparticle. The gold atoms then exit the stage, binding to the outer surface of the nanoparticle assembly. Gold is effective at ordering the iron and platinum atoms because the gold atoms create extra space within the nanoparticle sphere at the outset. When the gold atoms diffuse from the space upon heating, they create more room for the iron and platinum atoms to assemble themselves. Gold creates the crystallization chemists want in the nanoparticle assembly at lower temperature.
Gold also removes carbon monoxide (CO) from the reaction by catalyzing its oxidation. Carbon monoxide, other than being dangerous to breathe, binds well to iron and platinum atoms, gumming up the reaction. By essentially scrubbing it from the reaction, gold improves the performance of the iron-platinum catalyst. The team decided to try gold after reading in the literature that gold nanoparticles were effective at oxidizing carbon monoxide — so effective, in fact, that gold nanoparticles had been incorporated into the helmets of Japanese firefighters. Indeed, the Brown team’s triple-headed metallic nanoparticles worked just as well at removing CO in the oxidation of formic acid, although it is unclear specifically why.
The authors also highlight the importance of creating an ordered crystal structure for the nanoparticle catalyst. Gold helps researchers get a crystal structure called “face-centered-tetragonal,” a four-sided shape in which iron and platinum atoms essentially are forced to occupy specific positions in the structure, creating more order. By imposing atomic order, the iron and platinum layers bind more tightly in the structure, thus making the assembly more stable and durable, essential to better-performing and longer-lasting catalysts.
In experiments, the FePtAu catalyst reached 2809.9 mA/mg Pt (mass-activity, or current generated per milligram of platinum), “which is the highest among all NP (nanoparticle) catalysts ever reported,” the Brown researchers write. After 13 hours, the FePtAu nanoparticle has a mass activity of 2600mA/mg Pt, or 93 percent of its original performance value. In comparison, the scientists write, the well-received platinum-bismuth nanoparticle has a mass activity of about 1720mA/mg Pt under identical experiments, and is four times less active when measured for durability.
The researchers note that other metals may be substituted for gold in the nanoparticle catalyst to improve the catalyst’s performance and durability.
“This communication presents a new structure-control strategy to tune and optimize nanoparticle catalysis for fuel oxidations,” the researchers write.
Sen Zhang, a third-year graduate student in Sun’s lab, helped with the nanoparticle design and synthesis. Shaojun Guo, a postdoctoral fellow in Sun’s lab performed electrochemical oxidation experiments. Huiyuan Zhu, a second-year graduate student in Sun’s lab, synthesized the FePt nanoparticles and ran control experiments. The other contributing author is Dong Su from the Center for Functional Nanomaterials at Brookhaven National Laboratory, who analyzed the structure of the nanoparticle catalyst using the advanced electron microscopy facilities there.
The U.S. Department of Energy and the Exxon Mobil Corporation funded the research.
Get CleanTechnica’s 1st (completely free) electric car report — Electric Cars: What Early Adopters & First Followers Want.
Keep up to date with all the hottest cleantech news by subscribing to our (free) cleantech newsletter, or keep an eye on sector-specific news by getting our (also free) solar energy newsletter, electric vehicle newsletter, or wind energy newsletter.