Tesla vs. Tesla: The Juice In Your Car Will Increasingly Come Through HVDC, Edison’s Preferred Current

Sign up for daily news updates from CleanTechnica on email. Or follow us on Google News!

So you’ve got this awesome car, Tesla Models S/3/X. You plug it in at night in your garage or at a local garage with an urban Supercharger, or maybe your company is enlightened and has chargers in the parking garage along with bike racks and an LRT shuttle.

But where is the electricity coming from? Increasingly, it’s generated by wind, sun, or water, coming from a long way away and transiting high-voltage direct current (HVDC) transmission lines to get to you. This is one of the major trends in grid innovation I’m exploring in my ongoing series. It started with 7 Reasons the Future is Electric and has parallel threads on HVDC, blockchain for cleantech, and emerging ancillary markets that wind and solar can play in.

So, what’s HVDC and how is it different from normal transmission?

This is partially a Thomas Edison vs Nikola Tesla story. Edison was committed to direct current, but Tesla liked alternating current. Alternating current was easier to step up and down and DC couldn’t be transformed reliably, so it became the transmission and distribution standard for electricity. Edison did some ugly things to try to win the fight, but lost. Then he won economically anyway.

Most long-distance transmission today is built using high-voltage alternating current, but it has some interesting limitations.

◊ It’s limited to 765 kilovolts (kV), which is more than enough to fry an egg. Due to the nature of alternating current, after that, voltage losses due to the electromagnetic field interacting with the insulation and heating it makes AC uneconomic.

◊ Most of the transmission is through elevated lines, in part due to the expense of burying lines and maintaining underground lines, but also because the heat buildup problem is worse underground and they hold more charge, which limits the distance they can transmit electricity to about 80 kilometers. The holding more charge point, capacitance, means that more energy has to be pushed into the line before it can be reversed. Overhead, high-voltage alternating current lines are kept a long way from one another and the earth, because the electromagnetic fields of individual lines interact, reducing total capacity. Underwater alternating current transmission has worse challenges than underground transmission.

◊ You can’t make the wires thicker than they are to get greater throughput because alternating current has a strong tendency to flow near the surface of metal conductors, so making them thicker adds a lot of weight and not much transmission capacity.

◊ The last bit of the challenge is that frequency is hard to change, so any alternating current transmission must be between two grids operating at the same frequency.

That’s a lot of engineering compromises to deal with, but alternating current is obviously economically viable for transmitting electricity long distances, so these aren’t deal breakers in most situations.

Until 1954, there was no real alternative to this set of compromises. That’s the year that the problem of reliably changing the voltage of direct current up and down was cracked. ABB, a major player in this space, built a submerged 96 kilometer HVDC transmission line between the Swedish mainland and an island.

Direct current doesn’t have most of the limitations of alternating current for transmission.

◊ While it’s limited to about 800 kV, not dissimilar from AC, the way it’s constructed you effectively get double the voltage of AC.

◊ Underground and underwater lines don’t lose effectiveness for transmission compared to aboveground lines. No electromagnetic field is created by direct current to interact with other wires, the ground, or water.

◊ The wires can be arbitrarily thick because direct current doesn’t tend to flow along the surface.

◊ Direct current has no frequency, so it’s easy to connect two grids at different frequencies and use electronics to match frequency when it’s converted back to AC. HVDC is sometimes referred to as asynchronous transmission for this reason.

But direct current has still had two limitations that prevented it from taking over the world, at least until recently.

The first is that the voltage converters were a lot more expensive than the simple, physical alternating voltage converters. DC converters are electronic in nature, and as I pointed out in the 7 Reasons article, Electronics outperform the physical. That’s true in this case too, with DC transformers plummeting in cost. If you look around, almost every electrical device you can see runs on DC internally and the power blocks convert AC from the plug to DC for the device. That’s been made cheaply possibly by electronics, and it’s true for transmission-scale transformers as well.

The second problem is that circuit breakers for high-voltage direct current were ineffective. Circuit breakers are components that protect electrical systems from excess current. If you have an older home, you probably have a fuse box. If you have a newer home, you probably have electronic circuit breakers, typically a row or two of black switches in a panel. Mechanical breakers for DC were too slow while semiconductor breakers were fast enough but had 30% power loss. This has been hard to overcome, but it’s been licked recently with a new generation of hybrid breakers.

Why is this important again?

HVDC lines always deliver more of the power put into them regardless of the distance that the electricity travels. But the big reason this is important is that it’s cheaper at longer distances and at very short distances underwater and underground.

“Over a certain distance, the so called ‘break-even distance’ (approx. 600 – 800 km), the HVDC alternative will always provide the lowest cost.

“The break-even distance is much smaller for subsea cables (typically about 50 km) than for an overhead line transmission.”

The diagram is interesting. DC terminals will always be more expensive than AC terminals simply because they have to have the components to transform DC voltage as well as convert the DC to AC. But the DC voltage conversion and circuit breakers have been dropping in price. The break-even price continues to drop.

Right now on modern grids, transmission losses are 7% to 15% with aboveground transmission. With DC transmission, they are a lot lower, and they remain low if you run the cables underwater or underground.

The NIMBY factor

That last point is worth drawing out a bit, as it’s directly related to the use of HVDC for renewables. A key element in the successful use of renewables is continent-scale grids. Energy has to flow from low-carbon hydro in areas with low biomass far north, far south, across deserts, from areas with lots of sun nearer the equator, and from wind offshore or in windy plain areas to large urban and industrial areas. In the USA, the best wind and sun resources are in places a long way from most of the people.

With alternating current, that means huge towers and lines marching across long distances. And that means a lot of people protesting because they hate change, they don’t want their views spoiled, they think that their land is somehow special and shouldn’t have a tower on it, or because they have an irrational fear of the electromagnetic spectrum. I’ve written a lot about NIMBYs in the past — in fact, the article linked was my second article ever on CleanTechnica and published close to 4 years ago. Much of what I said holds for transmission projects as well.

HVDC holds the promise of being able to dodge this problem in a lot of places. Where it’s impossible to overcome local outrage at the thought of big metal towers, it is possible to bury the line for a few miles. It’s more expensive, but it’s a way to dodge a lot of the problems.

And the last thing you can do with HVDC that’s interesting is that you can string it on existing AC tower paths, effectively making your existing, accepted transmission route deliver a lot more electricity to highly populated areas. That typically avoids NIMBY complaints too.

The archipelago factor

The other place this makes a difference is for populaces spread over islands. Indonesia is a good example. It has 261 million people living on 6,000 of its 17,500 islands. And a lot of those islands depend on oil and diesel generation.

Japan is similarly challenged. While most people think of it as a country, or if they know more think of it as three or four big islands, it actually has 6,852 islands with 430 of them populated. Japan is looking at two major HVDC power links to Asia to enable it to break free of its need to generate and manage all of its own electricity in a limited geographical area with significant terrain challenges.

And lots of people think of the British Isles as a few big islands, but it’s actually well over 6,000 islands with close to 200 permanently occupied. Denmark has a mainland, but also 1,000 islands with 70 of them inhabited. This pattern repeats itself globally.

Remember that HVDC doesn’t lose effectiveness when submerged, unlike AC transmission. Remember also that renewables are more and less effective in different places, often different places than the people who need the electricity. And remember that offshore wind energy has one of the highest capacity factors available, with 50% as a usual number and 60% not unusual.

When HVDC pays for itself with lines 50 km long, the HVDC revolution of cheap transformers and effective breakers starts to look like a miracle.


So that’s HVDC and why the electricity you use will increasingly come through HVDC transmission. It gets more power delivered over longer distances, it’s increasingly economically viable, it works better underground, it works better underwater, it can dodge NIMBYs, and it reduces the challenge of variable renewable generation. It’s one of the top innovations in the world of electricity, and it’s coming soon to a grid near you.

Future articles will look at specific projects, take a closer look at the economics, and explore some of the factors touched on in this article in greater depth. The set of innovations that have led to HVDC transmission being increasingly competitive and effective in places where AC is less effective are going to enable greater growth of renewables globally.

As one last data point, China’s State Grid Corporation has seriously put forward the idea of building a global HVDC grid to tie all of the wind and solar power in the world together by 2050. The potential for low-loss, long-distance movement of electricity is enormous. The larger the grid, the less storage will be required.

As always, I’ll be paying close attention to comments. Where I’ve made mistakes, correct me. If you know of interesting HVDC projects, let me know, especially in non-English language countries where my ability to find them on the internet is challenged.


Have a tip for CleanTechnica? Want to advertise? Want to suggest a guest for our CleanTech Talk podcast? Contact us here.

Latest CleanTechnica TV Video


Advertisement
 
CleanTechnica uses affiliate links. See our policy here.

Michael Barnard

is a climate futurist, strategist and author. He spends his time projecting scenarios for decarbonization 40-80 years into the future. He assists multi-billion dollar investment funds and firms, executives, Boards and startups to pick wisely today. He is founder and Chief Strategist of TFIE Strategy Inc and a member of the Advisory Board of electric aviation startup FLIMAX. He hosts the Redefining Energy - Tech podcast (https://shorturl.at/tuEF5) , a part of the award-winning Redefining Energy team.

Michael Barnard has 702 posts and counting. See all posts by Michael Barnard