Published on April 14th, 2017 | by Scott Cooney0
Cost-Effective Window Inserts Can Insulate Older Windows Without Replacing Them (Review)
April 14th, 2017 by Scott Cooney
Originally published on Green Living Ideas.
Older windows can be a huge waste of money when you try to heat or cool your home. R values (a measure of insulation, measured in “resistance” of heat passing from one place to another) are very, very low for older windows. Whereas your walls might have an R value of 20-40, depending on local zoning codes, how well built your home was, and how much insulation was added, your windows might have an insulation value of 1 or 2. What that means is that while you’re trying to keep your home cool (or warm in the winter), you’re continually losing your desired temperature more through your windows than just about anywhere else in your home (unless you’ve got a gaping hole somewhere).
Replacing windows can be exceptionally expensive. I had 4 single pane windows in my home that were clearly losing a ton of heat (you can tell just by touching them…if they’re really cold in the winter to the touch, that means that they’re sucking heat out of your home). One company’s bid to replace just the four windows with something more energy efficient came to well over $6,000 for parts and labor. So what’s a frugal greenie to do?
Window Inserts: A Product Review
Window inserts are great products to help you cut your utility bills and improve the comfort of your home. Recently, I got a couple of window inserts through WindowInserts.com, and put them over a couple of the draftiest windows in my house. The difference was immediately noticeable. The inserts, which are an aluminum frame with weatherstripping foam around the outside, and a clear vinyl “window” in the frame, just press directly into the frame of your window, trapping an extra layer of air between your window and the insert, thereby creating a thermal barrier. The net effect is to help keep the temperature outside from becoming the temperature inside.
Now, I’m an eco-nerd, and just happen to have a thermal imaging camera. So I took some before and after photos of the windows. Check out the below–basic idea is that, with a thermal image, you can see where heat is being lost. The photos on the left show the windows I have in my house without the insert, and the photos on the right show the result after the window inserts are, well, inserted.
If you’re scratching your head and saying that the images on the right look basically like one big sheet of orange, well, you’re right–that means that heat’s no longer being lost, and you’re seeing one thermal temperature across wall, window frame, and window. Wicked cool, right?
But how do they look aesthetically? See for yourself. Check out more before and after photos:
Reprinted with permission.
Check out our new 93-page EV report, based on over 2,000 surveys collected from EV drivers in 49 of 50 US states, 26 European countries, and 9 Canadian provinces.