Connect with us

Hi, what are you looking for?

Oak Ridge National Laboratory is hot on the trail of a new energy efficient graphene desalination membrane -- but there's a big, fat, methane catch.


Methane To The Rescue! New Energy Efficient Graphene Desalination Membrane For The 99%

Oak Ridge National Laboratory is hot on the trail of a new energy efficient graphene desalination membrane — but there’s a big, fat, methane catch.

The folks over at Oak Ridge National Laboratory are hot on the trail of a new graphene desalination membrane, which could free up vast amounts of the world’s water resources for human use. Currently, according to the lab, more than 99% of the world’s water is undrinkable, much of that being locked up in seawater

Somewhat ironically the whole thing is based on methane, the chief component in natural gas. Those of you familiar with natural gas fracking issues might be giving it the stinkeye on that account, but let’s take a look and see what they’re up to.

energy efficient desalination membrane

The Desalination Conundrum

Conventional desalination involves a process called reverse osmosis, in which water is forced through a membrane.

Reverse osmosis is a big step up from distillation in terms of energy consumption, and more efficient systems are in the pipeline (check out this four-in-one desalination process, for example).

Despite recent improvements, though, reverse osmosis still sucks up huge amounts of energy, and part of the problem is the membrane. Conventional membranes are based on polymers (plastics). They tend to get clogged up during the process, and they have to be cleaned regularly in order to keep operating at their personal best.

One emerging solution is solar-powered desalination. Renewable energy helps to reduce dependence on fossil fuels, but it doesn’t address the membrane issue. In an increasingly crowded world, energy efficiency is a critical factor, regardless of whether you’re using fossil fuels or renewables.

An Energy Efficient Graphene Desalination Membrane

That’s where the graphene comes in. And the methane, too.

The new Oak Ridge graphene research is still in the proof of concept stage, but things look promising. The idea is to replace conventional polymer membranes with graphene.

For those of you new to the topic, graphene is a relatively new form of carbon, first discovered in 2004. Since then it has engendered thousands of research papers as scientists dig into its unique properties.

Here’s a schematic look at graphene, showing its unique hexagonal structure (the two blue areas show the chemical bonds of impurities in the graphene sheet):

graphene courtesy of ORNL

Graphene is only one atom thick but it is super-strong. A graphene membrane could be made thinner and more porous than a polymer membrane, so you would need less pressure — and therefore less energy — to push water through it.

The problem is how to make the stuff at commercial scale. Graphene is only one atom thick, so fabricating graphene is a delicate task.

The Oak Ridge team also had to figure out how to punch precisely sized holes in a sheet of graphene, large enough to let water molecules through, but too small for salt ions to pass.

Here’s how the lab describes the methane part of the process for making graphene membranes:

To make graphene for the membrane, the researchers flowed methane through a tube furnace at 1,000 degrees C over a copper foil that catalyzed its decomposition into carbon and hydrogen. The chemical vapor deposited carbon atoms that self-assembled into adjoining hexagons to form a sheet one atom thick.

That was the easy part. The next step involved putting the graphene sheet on a chip of silicon nitride, and exposing it to an oxygen plasma in order to force out selected carbon atoms. That left a hole or pore in the sheet.

The team was able to tune the number and size of the pores by varying the length of time that the carbon sheet was exposed to the plasma.

That’s a whole story in itself. To calculate the most effective pore size, the team went over to a shared science user facility at Oak Ridge called the Center for Nanophase Materials Sciences, and asked to borrow their scanning transmission electron microscopy (STEM) gear.

STEM provided the team with an atom-scale image of their graphene sheet, which they used to correlate porosity with its transport properties. That enabled them to calculate the optimal pore size, and distribution level, for desalination.

In case you’d like to try this at home, that would be pores in the range of 0.5 – 1 nanometers across, distributed at a rate of one per 100 square nanometers.

The topmost image in this article shows the red graphene membrane stabilized with yellow silicon atoms. The circular figure is an enlargement to show off the honeycomb structure. Ignore the orange areas — those are residual blotches of a polymer.

Just What The World Needs: A Methane Based Graphene Desalination Membrane — No, Really

So far the graphene desalination membrane has passed its tests with flying colors, achieving almost 100 percent rejection of salt ions while allowing water to flow through at a rapid pace.

To ice the cake, according to Oak Ridge the methane-based fabrication method could be scaled up to a commercial level.

That’s not such great news when you factor in the rapid increase in environmental, public health and quality-of-life baggage carried by oil and gas fracking operations. In the US, for example, fracking (short for hydrofracturing) was practically a non-issue when it was confined to thinly populated areas in western regions, but in recent years it has exploded into more heavily populated areas as the result of new shale discoveries.

The use of methane in water purification particularly ironic, given that one of the major issues in natural gas fracking is water contamination from both fracking fluid and fracking wastewater disposal.

On the other hand, when you consider the growth of methane-rich, renewable biogas sources, perhaps some day in the sparkling green future that super-efficient graphene desalination membrane can trace its roots to your friendly neighborhood hog farm.

Follow me on Twitter and Google+.

Image Credits: Courtesy of Oak Ridge National Laboratory.

Appreciate CleanTechnica’s originality? Consider becoming a CleanTechnica member, supporter, or ambassador — or a patron on Patreon.
Sign up for our free daily newsletter to never miss a story.
Have a tip for CleanTechnica, want to advertise, or want to suggest a guest for our CleanTech Talk podcast? Contact us here.

New CleanTechnica Podcasts

Written By

Tina specializes in military and corporate sustainability, advanced technology, emerging materials, biofuels, and water and wastewater issues. Tina’s articles are reposted frequently on Reuters, Scientific American, and many other sites. Views expressed are her own. Follow her on Twitter @TinaMCasey and Google+.


#1 most loved electric vehicle, solar energy, and battery news & analysis site in the world.


Support our work today!


Power CleanTechnica: $3/Month

Tesla News Solar News EV News Data Reports


EV Sales Charts, Graphs, & Stats

EV Press Releases


Our Electric Car Driver Report

30 Electric Car Benefits

Tesla Model 3 Video

Renewable Energy 101 In Depth

solar power facts

Tesla News

EV Reviews

Home Efficiency

You May Also Like


Today, the U.S. Department of Energy (DOE) announced that it is partnering with Youngstown State University and DOE’s Oak Ridge National Laboratory to advance...


A new lithium-ion electric vehicle battery ditches cobalt for high performance without the supply chain risk baggage.

Clean Power

The U.S. Department of Energy’s (DOE’s) Wind Energy Technologies Office (WETO) provides global leadership in fundamental wind energy science research, development, and validation activities...


This fourth round of US DOE Solar Energy Technologies Office projects concerns solar–hydro hybrid power plants, other solar hybrid power plants, microgrids, grid storage...

Copyright © 2021 CleanTechnica. The content produced by this site is for entertainment purposes only. Opinions and comments published on this site may not be sanctioned by and do not necessarily represent the views of CleanTechnica, its owners, sponsors, affiliates, or subsidiaries.